This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title
 

Car Audio Installation Options

Materials Needed

Some of the materials you need to install a stereo include a socket wrench, a screwdriver, voltage meter, a solder or crimper, and a small battery. You may need some wire ties and electrical tape to keep the wires of the system tied in one place.

Removing the Original Radio or Stereo

You need to remove your old radio before you can install the new one. This is where the screwdriver comes in handy. Start by removing the screws that hold the front panel of the system. Be sure to keep the screws in one easy-to-reach place where you cannot lose them. Take the front panel of the system out. Inside the CD player housing, you will find another panel that you need to gently pull out until it unsnaps. Unscrew all the screws and bolts holding in the system. Pull out the CD player and unplug the cable that connects it to the automobile.

Wiring the New Radio

Take the cable of the new stereo and plug it into the car. Put the stereo where it needs to be and screw it into place. Make sure the screws are screwed in tight. Do the same for the front panel.

Hiring Someone Else

Many automotive companies provide radio installation services. In addition, electronic stores can install entertainment systems purchased from their stores. A car entertainment system installation is quite simple and there are slim chances that you will encounter any problems when you hire a professional to do the installation.

Car Audio Tips

Many modern vehicle CD players come with a wide range of features and are relatively sensitive pieces of equipment. It is important to take caution when operating your car CD player in different temperatures. If the motorcar has been exposed to the sun for a prolonged period and its interior temperature has increased, consider waiting until the automobile has cooled down before turning on the vehicle entertainment system. The same rule applies during winter; let the vehicle warm up a bit before turning on its entertainment player to reduce the risk of a malfunction.