This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title

Buff a Car

Choose a Buffer

For fine results, it’s better to work with a high-speed buffer as they are better at eliminating blemishes and scratches thoroughly. However, make sure you practice using this type of buffer.

Orbital buffer: for better results, we suggest that you try out a random orbital buffer. The great thing about these buffers is that they are not hard to use. Moreover, random orbital buffers make use of less compound relatively. Therefore, they are cost-effective.

Manual buffing: if you can’t bear high costs, use manual buffing. However, keep in mind that manual buffing requires a lot of effort, and the results won’t be impressive. On the other hand, manual buffing doesn’t require lots of equipment.

Compound or polishing product: you can also buy a compound of polishing product for best results. If the finish has deep scratches, you should go for this option. On the other hand, polisher is used when the body paint is good but needs better shine. Actually, this decision will vary based on the model, age and condition of the car. With the buffer, you can use either of the products. You can ask your friends, or good car aficionados for product recommendations.


First of all, you should dry your vehicle with a soft towel. In order to make sure that the vehicle is dry, you should work on the whole unit.

Next, you should apply lots of compound or polisher to the car body. Ideally, you should start with the hood.

Put the buffer on your quality polishing product and then move it around for proper application. Moreover, you should use circular motions for buffing each area of the vehicle.

Moreover, if you are going to use a good powered buffer, you should switch the product on and then move your quality buffer in a circular motion.